How to hook up bow sac on 2015 axis T22

Egreg3 · **Joined:** Sun May 31, 2015 4:37 pm **Posts:** 16

Trying to get some help on knowing which hose goes to which hookup on the bag. I am new to axis and would appreciate any help given.

T22rider · **Posted:** Tue Jun 02, 2015 10:23 am

Unhook the y remove it. Turn on front pump and put hose to your ear should be able to tell which hose is Hooked to the pump it will go to one of the ports on the top of the bag. Then trace the other two hoses one will go down through the floor that will be the drain. The other hose will be the vent hook it to the other port on the top of bag. Hope this helps.

Egreg3 · **Joined:** Sun May 31, 2015 4:37 pm **Posts:** 16

Yes this does help greatly appreciated

Robert95z · **Joined:** Tue Sep 02, 2014 1:55 pm **Posts:** 148

The fill should have a check valve on it, the drain should go into the floor, and the vent should be the most forward hose.

ThatGuy · **Posted:** Wed Jun 03, 2015 12:40 pm

This should help me when I'm playing around with it this weekend, still need to buy sacs though!

6wakesurfers · **Joined:** Fri May 29, 2015 7:16 pm **Posts:** 118

I have 2015 T22. Dealer installed bow sack. The bow space under seats is very tight, my bag pushes up the center cushion when too full. My biggest concern is the top of bag hitting the unfinished fiberglass. The fiberglass has a lot of sharp edges that could easily puncture the bag. Has anyone addressed this or had an issue?

kingranch · **Joined:** Sat Mar 01, 2014 8:45 am **Posts:** 28

^^

I had the same concern..100 hrs later and bow bag never popped or leaked.. but i agree, shame on axis for such a shabby fiberglass job...watch you fingers when installing that bag you will get poked

3oh2rider · **Joined:** Sat May 09, 2015 7:39 pm **Posts:** 110

Thanks for starting this thread. I just picked up my 15 t22 on Friday. 3 hours always from being able to fill her up and throw the rope out. I assume the valve in the rear lockers has to do with the plug and play? Did you guys reinforce your engine dividers? I have 750s coming and would like to do any prep work before the bags come in. And to agree with what others stated about the Fiberglass work, they should slow there production line down a tad and finish of the details.

T22rider · **Posted:** Mon Jun 15, 2015 8:57 pm

No engine wall support with 750

3oh2rider · **Joined:** Sat May 09, 2015 7:39 pm **Posts:** 110

Did those who installed the bow sac have to buy extra quick connect fittings? I find it kind of messed up that the back came with the fittings installed and not the front.

Axis Wakeboard Boat Forum

How to hook up bow sac on 2015 axis T22

Who is online